Tuesday, January 26, 2016

Ways to Keep Phoenix Furnace Maintenance Costs Low

Phoenix furnace maintenanceA home furnace is a significant investment, so keeping up with Phoenix furnace maintenance is pivotal for getting the best service life out of your system. Homeowners should diligently monitor their system and its performance while taking note of any irregularities. They should also use best practices in their home that help consistently reduce the workload placed upon the system.

Habits like these help ensure that your furnace will be cheaper to maintain and last longer over an extended period. Use these following tips when trying to get the best performance possible out of your furnace system without having to break the bank to keep it running.

Avoid Overworking the Unit

A homeowner’s best bet to ensure a long, affordable and happy experience with their furnace is to take any steps they can that make the furnace’s job easier. Their priority should be to promote airflow while avoiding any actions that might place undue stress upon the system.

Some ways to achieve these goals include:

  • Regularly changing the air filter every two to six months

  • Keeping all vents open or mostly open to prevent pressure buildups

  • Keeping doors open rather than sealing off rooms when possible

  • Never covering up or obscuring vents with furniture or belongings

  • Arranging your rooms to promote open airflow

  • Reversing the direction of your ceiling fans to pull warm air from the ceiling

  • Wearing warm clothing at night or during cold days and lowering the thermostat temperature slightly

  • Giving the unit a break on high load days, especially when you go to bed or leave the house

  • Positioning the thermostat away from cool spots in the house, which can make the system think it is cooler inside than it actually is

Use a Programmable Thermostat

Going off the same point as above, a programmable thermostat can intelligently reduce furnace system loads during times in which less heat is needed. For example, when you go to bed at night, your programmable thermostat can allow the temperature to go a few degrees lower than usual. Since you are asleep under the covers, you will not notice the house being slightly cooler. About a half hour before you wake up, the thermostat can begin warming the home back up to normal.

This scheduled heating and cooling not only extends a furnace’s service life and reduces repair costs, but it can significantly reduce heating costs as well.

Schedule Regular Maintenance Calls

Having regular maintenance for furnaces is critical. No matter how much you pamper your furnace, you will need a professional heating service Phoenix technician to come examine the system periodically and perform needed maintenance. Much like a car, a furnace has parts that must be cleaned or replaced regularly to prevent the more expensive parts from wearing out or becoming damaged long before their time.

Ask your local Phoenix furnace technician if they offer service plans that allow you to have your system inspected and maintained as needed before the winter heating season and several months in so that small problems do not become worse over time.

By taking these above precautions, you and your family can stay warm this winter without worrying about crippling repair expenses dampening your spirits.


Find out the best ways to save on or reduce your furnace maintenance in Phoenix. Speak with one of the most trusted HVAC companies in Phoenix, Hays Cooling & Heating! Call 602-714-8270 today.

Read related articles:

Read the full story at: http://hayscoolingandheating.com/phoenix-furnace-maintenance-costs-low/

Tuesday, January 19, 2016

Benefits of Installing a Trane Gas Furnace in Phoenix

Trane Gas Furnace in PhoenixEven though our winters can be mild, a Trane gas furnace in Phoenix is vital for those chilly desert nights and generally cool winter seasons. Installing a Trane gas furnace ensures that your home can remain comfortable in all conditions, increasing your enjoyment of your property and investing in its long-term appeal. Trane gas furnaces also excel at what they do: lasting many decades, delivering reliable, efficient service and meeting your needs with advanced features.

Read on to discover more about why a Trane gas furnace install could be one of the smartest and most rewarding home investments a homeowner can make.

Energy Efficiency

Anyone in the market for an efficient gas furnace need look no further than a Trane. Trane home gas furnaces are energy-efficient due to the advanced technologies that Trane tirelessly researches, tests and develops.

For instance, variable-speed blower motor setups using Trane’s patented Comfort-R technology make system startups efficient and seamless. Rather than forcing the motor to kick in on high gear and blast a gust of air through the system, it slowly primes the blower motor and adjusts its performance to the conditions at hand.

Looking at the entire Trane gas furnace product line, you can see that the minimum AFUE efficiency rating is 80 percent for the lowest-end models. Going up to the higher end, features like dual-stage heating and multiple heat exchangers amp up the efficiency to 96.7 percent. Many models in the lineup also qualify for Energy Star certification.

Reliability and Incredibly-Long Service Life

As their old ad slogan went: “Nothing Stops a Trane.” Trane puts major effort into build quality and clever design features that help maintain a long service life for your unit. A comparable price to major competitors and an extended service life means that you get more money out of your unit. Additionally, lower repair costs and less downtime mean cheaper lifetime ownership costs.

To give an example of how Trane’s designs are different, consider their Silicon Nitride hot surface igniter. The device, which is responsible for igniting the furnace, was developed to deliver reliable ignitions at variable temperatures given the desired heating conditions.

Another example of Trane’s life-expanding ingenuity lies in the ComfortLink II diagnostics system. When connected to a technician’s interface, they can quickly identify the mechanical problems and see a history of prior alerts or failures. With this information in hand, the repair technician can provide the best service while paying attention to key system components as needed.

Lower Heating Bills

While general efficiency and longevity put money back into your pocket in the long run, energy-efficient technologies also save you more every month in the form of lower gas bills. With an efficient Trane system, more of the money you spend on gas actually goes into heating the house. Additionally, the advanced heating capabilities allow your Trane furnace system to run only as long as it needs to, keeping your home toasty and warm all winter with minimal costs.

Get the Trane Gas Furnace Your Family and Your Home Deserves

Based on the self-evident superiority of Trane systems, you may now be interested in learning more about how to research the right Trane gas furnace for your home. You can consult your local heating installation Phoenix company for estimates and recommendations on which furnace should be custom-installed to fit the needs of your space.


Are you looking to install a Trane gas furnace in Phoenix this winter?. Work with one of the most trusted HVAC companies in Phoenix, Hays Cooling & Heating! Call 602-714-8270 today.

Read related articles:

  • Most Frequently Purchased Heating Systems in Phoenix Arizona

  • How Often Should I Replace Furnace Filters in Phoenix?

  • What Are the Most Common Furnace Problems in Phoenix?

  • Read the full story at: http://hayscoolingandheating.com/trane-gas-furnace-in-phoenix/

    Tuesday, January 12, 2016

    How Often Should I Replace Furnace Filters in Phoenix?

    replace furnace filters in PhoenixMany homeowners wonder about how often they need to replace furnace filters in Phoenix. The good news is that the region’s arid climate lessens the chances of biological contaminants, such as bacteria and dust mites. The bad news is that living in the desert means that dust can be a persistent problem, even indoors.

    These two factors together mean you can change your air filter less frequently than some climates, but you are going to have to monitor the filter’s condition more diligently than others. To help ensure that you are changing your air filter just often enough, here are our guidelines for replacing furnace air filters based on your personal needs and your home’s conditions:

    General Guideline — No Less Than Once Every 6 Months

    No matter how clean your house is, you will want to change your air filter at least once every six months. Waiting any longer essentially guarantees that you are allowing particulate matter (PM) of some sort to saturate the filter and then begin infiltrating your ventilation system. Homes that neglect their filter any longer risk a serious decline in indoor air quality, including an increased risk of inhaling pathogens that can lead to infection.

    Additionally, letting your filter get clogged places serious loads on your system. The obstructed airflow creates high pressure/low pressure differentials that make your system have to work much harder than normal to get even a minimal amount of performance. So for your furnace’s sake and your lung’s sake, mark your calendar at least twice a year for a furnace filter change.

    Homes with Pets — 60 days

    Owning a pet is the single most significant air quality factor in most homes. Pets of all sizes and fur types generate dander, which can attract bacteria, mites and other pollutants. On top of that, pet fur tends to collect other dust and PM alongside it.

    You can give Fido or Mittens a bath to cut down on the indoor air quality effects, but, regardless, homeowners with pets will need to replace their air filters roughly once every other month.

    Home Without Pets — 90 Days

    Don’t have a four-legged or feathered roommate? You can wait a bit longer to check and change your air filter. Changing it about once every three months should be enough to maintain high indoor air quality at all times of the year.

    People with Sensitive Allergies – 45 days

    If you or someone in your house has allergy problems, then monitoring your air filter and changing it diligently will become a routine part of managing their symptoms. You can opt for filters with high MERV ratings to trap more allergens, but these products can become saturated much quicker and must be monitored even more closely.

    As a rule, protect those with allergies by changing your furnace filter once every five to seven weeks. Regularly sweeping, mopping and vacuuming can help improve your indoor air quality, as well.

    Bottom Line: Check Your Filter Regularly

    These above recommendations are just guidelines. Depending on the conditions of your home, such as smoking indoors or the age of your ducts, you may need to change your filter more or less frequently. You should always remove the filter and inspect it regularly to see for certain if it needs to be changed.

    If you have problems or concerns about your indoor air quality, you can consult a heating replacement specialist in Phoenix, AZ who can provide you with the solutions you need to keep everyone happy and healthy indoors all year round.


    Do you have questions about replacing furnace filters? Hays Cooling & Heating has 15 years of experience in Phoenix area HVAC service. Call 602-714-8270 today! 

    Read related articles:

    Read the full story at: http://hayscoolingandheating.com/replace-furnace-filters-in-phoenix/

    Tuesday, January 5, 2016

    What Are the Most Common Furnace Problems in Phoenix?

    common-furnace-problems-in-phoenix Winter this year may be mild, but relative to Phoenix’s typically balmy weather, plenty of people are feeling the season’s chill. When the heat does not work, your relaxing evening is suddenly spent tinkering with your HVAC system trying to figure out how to make hot air come out again.

    If you find yourself in this position, you have can now relax. Our troubleshooting list will cover the most common furnace problems in Phoenix so that you can diagnose and potentially fix the problem, getting your toasty heat back online. While we may not be able to help you identify every potential problem, let alone their solution, we can at least help you narrow down what it might be.

    Potential Problem #1 — The Thermostat

    Since any number of mechanical issues could be at play, your first step is to rule out the most obvious causes. Namely, the control unit that is supposed to tell the thermostat to kick on may not be working properly.

    Examine your thermostat to see if is operable. Modern digital thermostats have backlit displays to make this task easy. If you have an older thermostat, try flipping a switch to see if you get a reaction.

    If the thermostat seems to be on and connected, make sure that you have it set to the “heat” setting and that your set temperature is high enough that the system will come on. Note that many thermostats require your home to be two or more degrees colder than your setting before they activate.

    Barring any obvious fixes like these, your problem may still come down to faulty thermostat wiring. If your thermostat is active but there is no mechanical response within the furnace, wiring is even more likely to be the issue. Only allow licensed electricians to tamper and diagnose electrical problems you may be having.

    Potential Problem #2 — Air Flow Is Weak

    If your air flow is coming out in weak puffs rather than a strong current, you may have some sort of tear or blockage inside your air ducts. Inspect the ducts closest to the furnace and work your way outward to identify any leaks. You can usually feel the air escaping here instead of where it should be. Identifying leaks further along can be difficult when ducting runs through walls, but determining which air registers have flow and which do not can help you pinpoint the leak.

    Similarly, you may have blockage. The first culprit to check is your air filter. A dirty air filter can severely limit airflow. A blocked intake or stuck flapper valve can similarly prevent the furnace from getting the flow it needs.

    Blockage can also happen further down the ducting lines. Once again, identify which registers have strong air flow and which do not to determine where in the path the blockage could lay. Only attempt to remove blockage that is accessible from an air register, which can be done with a hose vacuum cleaner. Dismantling the ducting system should only be done by an HVAC professional.

    Potential Problem #3 — Cool Air Blowing

    In a twist of cruel irony, your furnace may be blasting chillier air than what is already in your house. The most likely reason is that the furnace has not ignited. Examine the furnace to see if you can identify the blue pilot flame or any orange heating flames. If you see no flames whatsoever, sniff the air to detect the gas’s methane tracer. If you think you smell methane or have any other reason to suspect a gas leak, shut off the main gas valve immediately. Evidence of long-running leaks may require you to evacuate the house.

    You can potentially relight the pilot light once the gas has been shut off and the air ventilated. Follow the instructions printed on the side of your furnace or provided with your installation since every furnace brand can have different considerations. Ask a professional to relight the pilot for you if you are nervous or have reason to suspect that doing so could be dangerous.

    If your pilot light and air blockage as discussed above are not the issue, you may have deeper problems that stem from needed heater repair in Phoenix.


    Looking for a trusted heating repair company to service your unit? Hays Cooling & Heating has 15 years of experience in Phoenix area HVAC repairs. Call 602-714-8270 today! 

    Read related articles:

  • Most Frequently Purchased Heating Systems in Phoenix Arizona

  • 3 Simple Steps To Maintaining Your Trane Furnace In Phoenix AZ

  • Best Home Heating Options in Phoenix During Winter Months

  • Read the full story at: http://hayscoolingandheating.com/common-furnace-problems-in-phoenix/