Ultimate Guide Trane Furnace Error Codes

If you have a Trane furnace, then you have one of the most reliable heating systems in existence. However, even the most reliable furnace runs into problems from time to time, and this is why your Trane has included several error codes to help you find a given issue. However, if you’re unfamiliar with error codes for furnaces, then you may be unaware of what these codes mean.

To get peace of mind, it’s important that you take a look at typical Trane furnace error codes to you learn what these error codes mean so you can get your system the service it needs.

A Slow Flashing Light

Not every furnace codes means you’re looking at a serious furnace repair in your future. In fact, some codes are there to let you know that your system is functioning properly. If you notice a light on your Trane furnace that is flashing slowly, this means that your furnace is on but it is not calling for heat. The only time this would be a problem is if you’ve raised your thermostat and your Trane does not respond, in which case you’ll need to think about heating repair in Phoenix.

A Rapidly Flashing Light

Another common light to be aware of on your Trane furnace is a light that flashes very rapidly. This code is the exact opposite of the slow flashing light code, and means that your Trane furnace is turned on and that it is presently calling for heat. This code usually means a problem only when the furnace is constantly calling for heat and not responding to your thermostat’s signals.

Look for a Light that Won’t Turn Off

When you go to check your furnace, it’s possible that you will see a light that will not turn off no matter what you do. If you notice a continuous light on your Trane that won’t turn off, it means that you will need to replace your furnace’s Furnace Control Board (IFC). Without the IFC, your furnace will not be able to work properly, making replacing a malfunctioning IFC and important part of repairing a furnace.

Beware a Light that Won’t Turn On

Of equal concern to a warning light that won’t turn off is a light that won’t turn on. If the error code light on your Trane furnace will not come on no matter what your furnace is doing, it means that you need to check your power source. Hopefully, this will only be a problem with the breaker in your home, but it could be a more serious issue in your furnace that warrants an extensive repair.

Watch for Trane Furnace Error Codes that Flash Multiple Times

The great thing about having a Trane furnace is that there are error codes that will blink in sequence to let you know what’s wrong with your system, and once you know these codes, you’ll easily be able to schedule repairs. Watch out for these sequence of flashes:

• Two flashes means that there has been a system lockout


• Three flashes indicates a draft pressure error


• Four flashes and your furnace is experiencing an open temperature limit circuit issue


• If you see five flashes, a flame was sensed within your furnace that should not be present


• The six flash error code means that your AC power was reversed or the voltage was too low


• Seven flashes indicates a problem with your gas circuit


• A low flame is indicated by eight flashes


• Check your igniter circuit if you see nine flashes

If you’re having trouble deciphering any of these error codes, you should schedule a repair appointment for your HVAC in Phoenix, AZ so you know what the exact problem with your furnace is.

_______________________________________

Contact the heating experts in Phoenix at Hays Cooling & Heating to get your home properly heated for the winter. Email us or call 602-714-8270 now!

Read related articles:

• Trane Furnace Troubleshooting and Repair [5 Expert Tips]


• How to Improve Indoor Air Quality During Winter in Phoenix


• Best Types of Home Heating Systems [Buyer’s Resource]

Read the full story at: http://hayscoolingandheating.com/trane-furnace-error-codes/

3 Reasons an HVAC Maintenance Program Saves You Money

When installing a HVAC system in your home, any additional expense can seem like a bit much. And when your system is brand new, expenses like an HVAC maintenance program feel downright unnecessary. However, it is likely that problems will eventually crop up, and your HVAC system will need repairs. You could find yourself facing some very costly bills when a little preventative HVAC maintenance could have caught the issue before it got out of control.

While an HVAC maintenance program can feel like an unnecessary added cost, it can actually keep you from suffering future repair costs. Here are three reasons an HVAC maintenance program saves you money.

1.) Save on Emergency Maintenance

Winter in our area is typically mild, and while the lows almost never get too low, you may find yourself in need of heating repair in Phoenix. When you need a repair, the last thing you want is for it to be an emergency. However, emergencies happen, and when they do, your HVAC maintenance program can come in handy. Most maintenance programs come with emergency service included (which means when your system has a problem, you won’t have to worry about finding a maintenance man at short notice or paying the very high costs that often come with emergency repairs).

2.) Save on Repair Costs with Routine Inspections

People don’t generally think about getting heating inspections unless something goes wrong, but this is a problem that is easily avoided with an HVAC maintenance program. Routine inspections—standard with HVAC maintenance programs—mean that any problems that may arise with your system will be caught before they become a major problem. Catching problems early on means that you are avoiding a costly repair later on. With your HVAC system getting periodic inspections, you never have to worry about your heat or air going out when you need them the most.

3.) Save on Energy Bills with Peak Efficiency

Everybody wants efficiency out of their HVAC system, but what they may not realize is that having an efficient HVAC system can mean a lot of saved money. In the same way that keeping your car at peak performance means you’ll be paying less for things like gas, making sure that your HVAC system is always at its most efficient means that you’ll be paying a lot less in electricity bills. Belonging to a maintenance plan for HVAC units ensures that your system will be regularly serviced and that your system is always running as well as it should be.  If it seems like your system is struggling, even a little bit, an HVAC maintenance program means a heating inspection and a return to 100% efficiency is only a phone call away.

Give Your Family Peace of Mind

When people decide not to enroll in an HVAC maintenance program, they are mostly worried about the cost involved. But you really can’t put a price tag on peace of mind. While an HVAC maintenance program will definitely save you money in the long run, its greatest value is the promise that you will never have to worry about the wellbeing of your system ever again. If you are interested in an HVAC maintenance program, you can contact local Phoenix heating repair services to find out more or enroll.

______________________

Find out the best ways to save on or reduce your furnace maintenance in Phoenix. Speak with one of the most trusted HVAC companies in Phoenix, Hays Cooling & Heating! Call 602-714-8270 today.

Read related articles:

Most Frequently Purchased Heating Systems in Phoenix Arizona

3 Simple Steps To Maintaining Your Trane Furnace In Phoenix AZ

Best Home Heating Options in Phoenix During Winter Months

Read the full story at: http://hayscoolingandheating.com/hvac-maintenance-program/